Product Category
RF Connector Stainless Steel millimeter wave 2.4mm to 2.4mm Male adaptor
2.40 mm connectors is to working a RF range at millimeter wave of RF connectors, its working frequency is normally over 50GHz. It has characteristic of high working frequency, but small size and high precision. 2.40 mm connector uses air as its dielectricity, and the connectors have a small size, lightweight and high reliability of character; As its structure size is similar size to the working wave length, any tiny change will affect its electrical performance. As a result, it requires a high precision of inner structure which also brings a higher requirement in design and manufacturing. Its interface can work with 1.85 mm connectors while keeping a high performance. It can afford a very low VSWR, insertion loss, and RF leakage thus it is a good choice for the high precision applications like testers, military devices, and Telecommunication.
Product Name: RF Connector Stainless Steel millimeter wave 2.4mm to 2.4mm Male adaptor
Key Performance
Connector Type: 2.4mm
Material Body: Stainless steel, passivated
Center Contact: Becu, gold plated
Insulator: PEI
Conductor Contact: male
Body Structure: Straight
Mounting Type: adaptor
Cable Type: none
Electrical Characteristics:
Frequency: DC to 50 GHz
Impedance: 50 Ohm
Temperature: -55℃ to + 135℃
Insulation resistance: Min 3000M ohm
Dielectric withstanding voltage: 7500 V
VSWR: DC 18GHz ≤1.12 |
18~26.5GHz≤1.15
26.5~50GHz≤1.25
Contact resistance: Inner 3.0M ohm
Outer 2.0M ohm
Lifecycle: 500 Cycles
Custom OEM Service:
We have standard products, but also provide OEM service for size, shape, structure, material type, electronic parameter request, etc. Factory was equipped with a complete set of necessary testers, including but not limited: network analizer, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc. Let us know your OEM requirement, and we will provide you solution and offer within 48 Hours.
Minimum Order Quantity: We did not have any MOQ request, even if you only order 1pcs sample for test or evaluation, we can also provide the products. For high volume orders, our facilities can afford monthly 1000K products.
Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.
2. All assemblies are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.
3. We are a direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;
4. All goods will be 100% tested by electronics test and visual test before out-going shipment.
With the above operation, we will try our best to make sure the goods delivered to customer are qualified and per the Data sheet.
Samples Request: We normally provide free samples of 2~5 pcs of standard products in stock, and the Buyer will only need to cover the international freight. For OEM products we also provide the sampling service while the Buyer pays for the necessary & reasonable sampling cost. We normally use DHL, FedEx, and UPS to ship samples which will take 3~7 days(detailed per Buyer location address).
Leadtime: Our lead time is normally 3 weeks. If OEM product, it will be 4 weeks. For high volume order, if there is forecast communication and agreement, we will prepare material so that leadtime can be 1 week.
How to Pay: We accept Paypal, Bank transfer and Pingpong, etc.
