RF connectors male MMCX-JHD straight for PCB board
RF connectors male MMCX-JHD straight for PCB board
Technical Details
MMCX connectors are micro-miniature connectors with a lock-snap mechanism allowing for 360 degrees rotationand usually have a 50 ohm impedance.MMCX connectors are designed for frequency ranges from DC up to 6 GHzand for applications where smallest dimensions have to be achieved.It is therefore ideal for applications whereboard height is limited,including applications where boards may be stacked.As such it is being widely used in many cellular telecommunications and wireless LAN applications.
Product Name: RF connectors male MMCX-JHD straight for PCB board.
Key Performance
Connector Type: MMCX
Material Body: Brass
Center Contact: BeCu Plated Gold
Conductor Contact:Male
Body Structure: Straight
Connect Type: Micro-stripe
Mounting Type:Soldered
Eelectrical Characteristics:
Frequency: DC to 18 Ghz
Impedance: 50 Ohm/75Ohm
Temperature: -65℃ to + 125℃
Insulation resistance: Min 5000M ohm
Dielectric withstanding voltage: 1500 V
VSWR: ≤1.1+0.005f
Custom OEM Service:
We have standard products, but also provide OEM service for size, shape, structure, material type, electronic parameter request, etc.
Factory were equipped with complete set of neccessory testers, including not limited: network anylizer, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.
Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.
Minumum Order Quantity:
We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.
for high volumn order, our facilities can afford montly 1000K products.
Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.
2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.
3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;
4. All goods will be 100% tested by electronics test and visual test before out-going shipment.
With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.
Samples Request:
We normally provide free samples 2~5 pcs of standard products in stock, and the Buyer will only need to cover the international freight.
for OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.
We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).
Leadtime:
Our leadtime is normally 3 weeks.
If OEM product, it will be 4 weeks.
For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be 1 weeks.
How to Pay:
We accept Paypal, Bank transfer and Pingpong, etc.
Additional Informations
Gallery
Technical Details
MMCX connectors are micro-miniature connectors with a lock-snap mechanism allowing for 360 degrees rotationand usually have a 50 ohm impedance.MMCX connectors are designed for frequency ranges from DC up to 6 GHzand for applications where smallest dimensions have to be achieved.It is therefore ideal for applications whereboard height is limited,including applications where boards may be stacked.As such it is being widely used in many cellular telecommunications and wireless LAN applications.
Product Name: RF connectors male MMCX-JHD straight for PCB board.
Key Performance
Connector Type: MMCX
Material Body: Brass
Center Contact: BeCu Plated Gold
Conductor Contact:Male
Body Structure: Straight
Connect Type: Micro-stripe
Mounting Type:Soldered
Eelectrical Characteristics:
Frequency: DC to 18 Ghz
Impedance: 50 Ohm/75Ohm
Temperature: -65℃ to + 125℃
Insulation resistance: Min 5000M ohm
Dielectric withstanding voltage: 1500 V
VSWR: ≤1.1+0.005f
Custom OEM Service:
We have standard products, but also provide OEM service for size, shape, structure, material type, electronic parameter request, etc.
Factory were equipped with complete set of neccessory testers, including not limited: network anylizer, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.
Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.
Minumum Order Quantity:
We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.
for high volumn order, our facilities can afford montly 1000K products.
Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.
2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.
3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;
4. All goods will be 100% tested by electronics test and visual test before out-going shipment.
With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.
Samples Request:
We normally provide free samples 2~5 pcs of standard products in stock, and the Buyer will only need to cover the international freight.
for OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.
We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).
Leadtime:
Our leadtime is normally 3 weeks.
If OEM product, it will be 4 weeks.
For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be 1 weeks.
How to Pay:
We accept Paypal, Bank transfer and Pingpong, etc.
