TNC Male RF Connector Flange for .086_RG405 coaxial Cable

Categories: , , Last Updated: September 22nd, 2023
Categories: , , Last Updated: September 22nd, 2023
Share Post

TNC Male RF Connector Flange for .086_RG405 coaxial Cable

Technical Details

TNC connectors are very similar to the BNC connector. The main difference is that it has a screw fitting instead of the bayonet one. Most TNC connectors are specified to 11 GHz, and some may be able to operate to 18 GHz. 

Its impedance can be 50 ohm or 75 ohm of design for your application.

The threaded coupling mechanism improves control over the interface dimensions and allows them to be used under a higher environmental load than BNC, especially under a high vibration load.

Chosen for their durability and reliability, TNC connectors are widely used in the cellular/mobile communication industry for equipment cabling and antenna interfaces


Product Name: TNC Male RF Connector Flange for .086_RG405 coaxial Cable


Key Performance
Connector Type: TNC
Material Body: Brass Plated Gold
Center Contact: phosphor bronze Plated Gold
Insulator: PTFE
Conductor Contact: Male
Body Structure: Straight
Mounting Type: Crimp for cable
Cable Type: 086, RG405 or specified


Eelectrical Characteristics:
Frequency: DC to 11 Ghz
Impedance: 50 Ohm
Temperature: -65℃ to + 180℃
Insulation resistance: Min 5000M ohm
Dielectric withstanding voltage: 1500 V
VSWR: ≤1.3

 


Custom OEM Service:

We have standard products, but also provide OEM service for size, shape, structure, material type, electronic parameter request, etc.

Factory were equipped with complete set of neccessory testers, including not limited: network anylizer, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.

Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.


Minumum Order Quantity:

We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.

for high volumn order, our facilities can afford montly 1000K products.


Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.

2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.

3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;

4. All goods will be 100% tested by electronics test and visual test before out-going shipment. 

With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.


Samples Request:
We normally provide free samples 2~5 pcs of standard products in stock, and the Buyer will only need to cover the international freight.

for OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.

We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).


Leadtime:

Our leadtime is normally 3 weeks. 
If OEM product, it will be 4 weeks.

For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be 1 weeks.


How to Pay:

We accept Paypal, Bank transfer and Pingpong, etc. 


 

Click here to contact us now for more!

Additional Informations

Gallery

Technical Details

TNC connectors are very similar to the BNC connector. The main difference is that it has a screw fitting instead of the bayonet one. Most TNC connectors are specified to 11 GHz, and some may be able to operate to 18 GHz. 

Its impedance can be 50 ohm or 75 ohm of design for your application.

The threaded coupling mechanism improves control over the interface dimensions and allows them to be used under a higher environmental load than BNC, especially under a high vibration load.

Chosen for their durability and reliability, TNC connectors are widely used in the cellular/mobile communication industry for equipment cabling and antenna interfaces


Product Name: TNC Male RF Connector Flange for .086_RG405 coaxial Cable


Key Performance
Connector Type: TNC
Material Body: Brass Plated Gold
Center Contact: phosphor bronze Plated Gold
Insulator: PTFE
Conductor Contact: Male
Body Structure: Straight
Mounting Type: Crimp for cable
Cable Type: 086, RG405 or specified


Eelectrical Characteristics:
Frequency: DC to 11 Ghz
Impedance: 50 Ohm
Temperature: -65℃ to + 180℃
Insulation resistance: Min 5000M ohm
Dielectric withstanding voltage: 1500 V
VSWR: ≤1.3

 


Custom OEM Service:

We have standard products, but also provide OEM service for size, shape, structure, material type, electronic parameter request, etc.

Factory were equipped with complete set of neccessory testers, including not limited: network anylizer, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.

Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.


Minumum Order Quantity:

We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.

for high volumn order, our facilities can afford montly 1000K products.


Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.

2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.

3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;

4. All goods will be 100% tested by electronics test and visual test before out-going shipment. 

With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.


Samples Request:
We normally provide free samples 2~5 pcs of standard products in stock, and the Buyer will only need to cover the international freight.

for OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.

We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).


Leadtime:

Our leadtime is normally 3 weeks. 
If OEM product, it will be 4 weeks.

For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be 1 weeks.


How to Pay:

We accept Paypal, Bank transfer and Pingpong, etc. 


 

Click here to contact us now for more!

Additional Informations

Gallery