RF Connector Stainless Steel 2.4mm Male Flange Mount
RF Connector Stainless Steel 2.4mm Male Flange Mount
Technical Details
2.40 mm connectors is to working a RF range at millimeter wave of RF connectors, its working frequency is normally over 50GHz.
It has characterisitc of high working frequency, but small size and high precision.
2.40 mm connector use air as its dielectricity, and the connectors has a small size, light weight and high reliablility of character;
As its structure size is similar size to working wave length, any tiny change will affect its electrical performance, as a result it requires a high precision of inner structure which also bring a higher requirement in design and manufacturing.
Itss interface can work with 1.85 mm connectors while keeping a high performnce.
And it can afford a very low VSWR, insertion loss, RF leakage thus it is a good choice for the high precision application like tester, millitary devices, and Telecommunication.
Product Name: RF Connector Stainless Steel 2.92 Female flange Mount
Key Performance
Connector Type: 2.4mm
Material Body: Brass Stainless steel, passivated
Center Contact: Becu, gold plated
Insulator: PEI
Conductor Contact: male
Body Structure: Straight
Mounting Type: Flange mount
Cable Type: none
Eelectrical Characteristics:
Frequency: DC to 50 Ghz
Impedance: 50 Ohm
Temperature: -55℃ to + 135℃
Insulation resistance: Min 3000M ohm
Dielectric withstanding voltage: 7500 V
VSWR: DC 18Ghz ≤1.12
18~26.5Ghz≤1.15
26.5~50Ghz≤1.25
Contact resistance: Inner 3.0M ohm
Outer 2.0M ohm
Lifecycle: 500 Cycles
Custom OEM Service:
We have standard products, but also provide OEM service for size, shape, structure, material type, electronic parameter request, etc.
Factory were equipped with complete set of neccessory testers, including not limited: network anylizer, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.
Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.
Minumum Order Quantity:
We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.
for high volumn order, our facilities can afford montly 1000K products.
Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.
2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.
3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;
4. All goods will be 100% tested by electronics test and visual test before out-going shipment.
With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.
Samples Request:
We normally provide free samples 2~5 pcs of standard products in stock, and the Buyer will only need to cover the international freight.
for OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.
We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).
Leadtime:
Our leadtime is normally 3 weeks.
If OEM product, it will be 4 weeks.
For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be 1 weeks.
How to Pay:
We accept Paypal, Bank transfer and Pingpong, etc.
Additional Informations
Gallery
Technical Details
2.40 mm connectors is to working a RF range at millimeter wave of RF connectors, its working frequency is normally over 50GHz.
It has characterisitc of high working frequency, but small size and high precision.
2.40 mm connector use air as its dielectricity, and the connectors has a small size, light weight and high reliablility of character;
As its structure size is similar size to working wave length, any tiny change will affect its electrical performance, as a result it requires a high precision of inner structure which also bring a higher requirement in design and manufacturing.
Itss interface can work with 1.85 mm connectors while keeping a high performnce.
And it can afford a very low VSWR, insertion loss, RF leakage thus it is a good choice for the high precision application like tester, millitary devices, and Telecommunication.
Product Name: RF Connector Stainless Steel 2.92 Female flange Mount
Key Performance
Connector Type: 2.4mm
Material Body: Brass Stainless steel, passivated
Center Contact: Becu, gold plated
Insulator: PEI
Conductor Contact: male
Body Structure: Straight
Mounting Type: Flange mount
Cable Type: none
Eelectrical Characteristics:
Frequency: DC to 50 Ghz
Impedance: 50 Ohm
Temperature: -55℃ to + 135℃
Insulation resistance: Min 3000M ohm
Dielectric withstanding voltage: 7500 V
VSWR: DC 18Ghz ≤1.12
18~26.5Ghz≤1.15
26.5~50Ghz≤1.25
Contact resistance: Inner 3.0M ohm
Outer 2.0M ohm
Lifecycle: 500 Cycles
Custom OEM Service:
We have standard products, but also provide OEM service for size, shape, structure, material type, electronic parameter request, etc.
Factory were equipped with complete set of neccessory testers, including not limited: network anylizer, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.
Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.
Minumum Order Quantity:
We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.
for high volumn order, our facilities can afford montly 1000K products.
Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.
2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.
3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;
4. All goods will be 100% tested by electronics test and visual test before out-going shipment.
With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.
Samples Request:
We normally provide free samples 2~5 pcs of standard products in stock, and the Buyer will only need to cover the international freight.
for OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.
We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).
Leadtime:
Our leadtime is normally 3 weeks.
If OEM product, it will be 4 weeks.
For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be 1 weeks.
How to Pay:
We accept Paypal, Bank transfer and Pingpong, etc.
