RF Connector SMB Female Jack straight connector crimp for LMR195 RG58 RG400 RG142 Cable
Technical Details
SMB connectors feature a quick connect/disconnect snap-on coupling and are available either in 50 ohm or 75 ohm impedances. It offers excellent electrical performance from DC to 4 GHz. This series of connectors conforms to MIL-C-39012. This version is smaller than SMA connectors. They are used for inter board or assembly connections within equipment.
Product Name: RF Connector SMB Female Jack straight connector crimp for LMR195 RG58 RG400 RG142 Cable
Key Performance
Connector Type: SMB
Material Body: Brass Plated Gold
Center Contact: BeCu Plated Gold
Insulator: PTFE
Conductor Contact: Female
Body Structure: Straight
Mounting Type: Crimping
Cable Type: None
Eelectrical Characteristics:
Frequency: DC to 4 Ghz
Impedance: 50 Ohm
Temperature: -65℃ to + 165℃
Insulation resistance: Min 1000Mohm
Dielectric withstanding voltage: 1000 V
VSWR: ≤1.1+0.02F
Custom OEM Service:
We have standard products, but also provide OEM service for size, shape, structure, material type, electronic parameter request, etc.
Factory were equipped with complete set of neccessory testers, including not limited: network anylizer, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.
Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.
Minumum Order Quantity:
We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.
for high volumn order, our facilities can afford montly 1000K products.
Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.
2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.
3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;
4. All goods will be 100% tested by electronics test and visual test before out-going shipment.
With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.
Samples Request:
We normally provide free samples 2~5 pcs of standard products in stock, and the Buyer will only need to cover the international freight.
for OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.
We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).
Leadtime:
Our leadtime is normally 3 weeks.
If OEM product, it will be 4 weeks.
For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be 1 weeks.
How to Pay:
We accept Paypal, Bank transfer, Pingpong, etc.
Additional Informations
Gallery
Technical Details
SMB connectors feature a quick connect/disconnect snap-on coupling and are available either in 50 ohm or 75 ohm impedances. It offers excellent electrical performance from DC to 4 GHz. This series of connectors conforms to MIL-C-39012. This version is smaller than SMA connectors. They are used for inter board or assembly connections within equipment.
Product Name: RF Connector SMB Female Jack straight connector crimp for LMR195 RG58 RG400 RG142 Cable
Key Performance
Connector Type: SMB
Material Body: Brass Plated Gold
Center Contact: BeCu Plated Gold
Insulator: PTFE
Conductor Contact: Female
Body Structure: Straight
Mounting Type: Crimping
Cable Type: None
Eelectrical Characteristics:
Frequency: DC to 4 Ghz
Impedance: 50 Ohm
Temperature: -65℃ to + 165℃
Insulation resistance: Min 1000Mohm
Dielectric withstanding voltage: 1000 V
VSWR: ≤1.1+0.02F
Custom OEM Service:
We have standard products, but also provide OEM service for size, shape, structure, material type, electronic parameter request, etc.
Factory were equipped with complete set of neccessory testers, including not limited: network anylizer, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.
Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.
Minumum Order Quantity:
We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.
for high volumn order, our facilities can afford montly 1000K products.
Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.
2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.
3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;
4. All goods will be 100% tested by electronics test and visual test before out-going shipment.
With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.
Samples Request:
We normally provide free samples 2~5 pcs of standard products in stock, and the Buyer will only need to cover the international freight.
for OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.
We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).
Leadtime:
Our leadtime is normally 3 weeks.
If OEM product, it will be 4 weeks.
For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be 1 weeks.
How to Pay:
We accept Paypal, Bank transfer, Pingpong, etc.