RF Connector BNC Female/Jack Bulkhead for RG316 Cable Crimp

Categories: , , Last Updated: October 18th, 2023
Categories: , , Last Updated: October 18th, 2023
Share Post

RF Connector BNC Female/Jack Bulkhead for RG316 Cable Crimp

Technical Details


BNC connectors have a bayonet-lock interface. It exists in 50 and 75 Ohm versions. Typically, they are specified for use at frequencies up to 4 and 2 GHz, respectively. BNC connectors are the most prevalent in computer networks, audio, monitoring, camera surveillance, video, data processing, and telecommunications equipment because of their size and relatively low installed cost.


Product Name:  

RF Connector BNC Female/Jack Bulkhead for RG316 Cable Crimp


Key Performance
Connector Type: BNC
Material Body: Brass Plated Nickel
Center Contact: BeCu Plated Gold
Insulator: PTFE
Flange: none
Conductor Contact: female
Body Structure: Straight
Mounting Type: Crimp for cable
Cable Type: RG316, etc


Electrical Characteristics:
Frequency: DC to 4 GHz
Impedance: 50 Ohm
Temperature: -55℃ to + 165℃
Insulation resistance: Min 5000M ohm
Dielectric withstanding voltage: 1500 V
VSWR: ≤1.3


Custom OEM Service:

We have standard products, but also provide OEM service for size, shape, structure, material type, electronic parameter request, etc.

Factory was equipped with a complete set of necessary testers, including but not limited: network analyzer, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.

Let us know your OEM requirement, and we will provide you solution and offer within 48 Hours.


Minimum Order Quantity:

We did not have any MOQ request, even if you only order 1pcs sample for test or evaluation, we can also provide the products.

For high volumn order, our facilities can afford monthly 1000K products.


Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.

2. All assemblies are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.

3. We are a direct factory with ISO9001:2015 Quality Management Standard Certificate, and we implement the standard;

4. All goods will be 100% tested by electronics test and visual test before out-going shipment. 

With the above operation, we will try our best to make sure the goods delivered to customer are qualified and per Data sheet.


Samples Request:
We normally provide free samples 2~5 pcs of standard products in stock, and the Buyer will only need to cover the international freight.

For OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.

We normally use DHL, FeDEx, and UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).


Leadtime:

Our leadtime is normally 3 weeks. 
If OEM product, it will be 4 weeks.

For high volume order, if there is forecast communication and agreement, we will prepare material so that leadtime can be 1 week.


How to Pay:

We accept PayPal, Bank transfer, Pingpong, etc. 


 

Click here to contact us now for more!

Additional Informations

Gallery

Table of contents
Share Post

Technical Details


BNC connectors have a bayonet-lock interface. It exists in 50 and 75 Ohm versions. Typically, they are specified for use at frequencies up to 4 and 2 GHz, respectively. BNC connectors are the most prevalent in computer networks, audio, monitoring, camera surveillance, video, data processing, and telecommunications equipment because of their size and relatively low installed cost.


Product Name:  

RF Connector BNC Female/Jack Bulkhead for RG316 Cable Crimp


Key Performance
Connector Type: BNC
Material Body: Brass Plated Nickel
Center Contact: BeCu Plated Gold
Insulator: PTFE
Flange: none
Conductor Contact: female
Body Structure: Straight
Mounting Type: Crimp for cable
Cable Type: RG316, etc


Electrical Characteristics:
Frequency: DC to 4 GHz
Impedance: 50 Ohm
Temperature: -55℃ to + 165℃
Insulation resistance: Min 5000M ohm
Dielectric withstanding voltage: 1500 V
VSWR: ≤1.3


Custom OEM Service:

We have standard products, but also provide OEM service for size, shape, structure, material type, electronic parameter request, etc.

Factory was equipped with a complete set of necessary testers, including but not limited: network analyzer, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.

Let us know your OEM requirement, and we will provide you solution and offer within 48 Hours.


Minimum Order Quantity:

We did not have any MOQ request, even if you only order 1pcs sample for test or evaluation, we can also provide the products.

For high volumn order, our facilities can afford monthly 1000K products.


Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.

2. All assemblies are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.

3. We are a direct factory with ISO9001:2015 Quality Management Standard Certificate, and we implement the standard;

4. All goods will be 100% tested by electronics test and visual test before out-going shipment. 

With the above operation, we will try our best to make sure the goods delivered to customer are qualified and per Data sheet.


Samples Request:
We normally provide free samples 2~5 pcs of standard products in stock, and the Buyer will only need to cover the international freight.

For OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.

We normally use DHL, FeDEx, and UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).


Leadtime:

Our leadtime is normally 3 weeks. 
If OEM product, it will be 4 weeks.

For high volume order, if there is forecast communication and agreement, we will prepare material so that leadtime can be 1 week.


How to Pay:

We accept PayPal, Bank transfer, Pingpong, etc. 


 

Click here to contact us now for more!

Additional Informations

Gallery