RF coaxial mmsx female to male to female board to board DIP PCB connection

Categories: Last Updated: August 28th, 2023
Categories: Last Updated: August 28th, 2023
Share Post

RF coaxial mmsx female to male to female board to board DIP PCB connection

Technical Details

The MMSX series is a miniature ball joint connector, and some models are soldered onto the PCB board using surface mount technology, serving as a board to board of quick insertion and separation coaxial connector.
It is a super tiny size afford space limit products which afford a minimum board to board height 6.7mm.
Its interforce support blind matching and quick connect and can support 8 degree Non concentric matching.

It is widely used in the field of radio frequency and microwave communication which need a small inner space requirement meanwhile require stably working performance.
finally it can support to replace or work with HUBER+SUHNER MMBX series connectors.


Product Name: RF coaxial mmsx female to male to female board to board DIP PCB connection


Key Performance
Connector Type: MMSX
Material Body: Brass Plated Nickel
Center Contact: Phosphor bronze Plated Gold
Insulator: LCP
Conductor Contact: female + male + female
Body Structure: Straight
Mounting Type: PCB Mount
Cable Type:  none


Eelectrical Characteristics:

Impedance:           50Ω

Frequency:             DC~6GHz

Rated Voltage:             330V(rms)

Withstanding voltage:                 1000V(rms)

VSWR:           1.065*+0.000×F(GHz)

                         ≤1.07(0~2GHz)

                         ≤1.15(2~6GHz)

Insertion lose:        0.15*√F GHz

                         ≤0.10(0~3.5GHz)

Insulation resistance:         ≥1GΩ

Inner contact resistance:      ≤5mΩ

Outer contact resistance:      ≤1mΩ


Mechanical

Lifecycle:             500 cycles

Tensile force:         ≥0.28N

 Insertion force:      15N

Withdrawal force:      15N

Center needle retention force (forward) ≥10N

Center needle retention force (reverse) ≥10N


Environment

Rated TEMP Range:       -55 ~ +165℃

Impact:          No electrical off>1us    

Shock:           No electrical off>1us   

Salt Spray:     48h               


Custom OEM Service:

We have standard products, but also provide OEM service for size, shape, structure, material type, electronic parameter request, etc.

Factory were equipped with complete set of neccessory testers, including not limited: network anylizer, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.

Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.


Minumum Order Quantity:

We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.

for high volumn order, our facilities can afford montly 1000K products.


Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.

2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.

3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;

4. All goods will be 100% tested by electronics test and visual test before out-going shipment. 

With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.


Samples Request:
We normally provide free samples 2~5 pcs of standard products in stock, and the Buyer will only need to cover the international freight.

for OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.

We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).


Leadtime:

Our leadtime is normally 3 weeks. 
If OEM product, it will be 4 weeks.

For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be 1 weeks.


How to Pay:

We accept Paypal, Bank transfer and Pingpong, etc. 


 

Click here to contact us now for more!

 

Additional Informations

Gallery

Table of contents
Share Post

Technical Details

The MMSX series is a miniature ball joint connector, and some models are soldered onto the PCB board using surface mount technology, serving as a board to board of quick insertion and separation coaxial connector.
It is a super tiny size afford space limit products which afford a minimum board to board height 6.7mm.
Its interforce support blind matching and quick connect and can support 8 degree Non concentric matching.

It is widely used in the field of radio frequency and microwave communication which need a small inner space requirement meanwhile require stably working performance.
finally it can support to replace or work with HUBER+SUHNER MMBX series connectors.


Product Name: RF coaxial mmsx female to male to female board to board DIP PCB connection


Key Performance
Connector Type: MMSX
Material Body: Brass Plated Nickel
Center Contact: Phosphor bronze Plated Gold
Insulator: LCP
Conductor Contact: female + male + female
Body Structure: Straight
Mounting Type: PCB Mount
Cable Type:  none


Eelectrical Characteristics:

Impedance:           50Ω

Frequency:             DC~6GHz

Rated Voltage:             330V(rms)

Withstanding voltage:                 1000V(rms)

VSWR:           1.065*+0.000×F(GHz)

                         ≤1.07(0~2GHz)

                         ≤1.15(2~6GHz)

Insertion lose:        0.15*√F GHz

                         ≤0.10(0~3.5GHz)

Insulation resistance:         ≥1GΩ

Inner contact resistance:      ≤5mΩ

Outer contact resistance:      ≤1mΩ


Mechanical

Lifecycle:             500 cycles

Tensile force:         ≥0.28N

 Insertion force:      15N

Withdrawal force:      15N

Center needle retention force (forward) ≥10N

Center needle retention force (reverse) ≥10N


Environment

Rated TEMP Range:       -55 ~ +165℃

Impact:          No electrical off>1us    

Shock:           No electrical off>1us   

Salt Spray:     48h               


Custom OEM Service:

We have standard products, but also provide OEM service for size, shape, structure, material type, electronic parameter request, etc.

Factory were equipped with complete set of neccessory testers, including not limited: network anylizer, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.

Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.


Minumum Order Quantity:

We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.

for high volumn order, our facilities can afford montly 1000K products.


Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.

2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.

3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;

4. All goods will be 100% tested by electronics test and visual test before out-going shipment. 

With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.


Samples Request:
We normally provide free samples 2~5 pcs of standard products in stock, and the Buyer will only need to cover the international freight.

for OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.

We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).


Leadtime:

Our leadtime is normally 3 weeks. 
If OEM product, it will be 4 weeks.

For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be 1 weeks.


How to Pay:

We accept Paypal, Bank transfer and Pingpong, etc. 


 

Click here to contact us now for more!

 

Additional Informations

Gallery