OEM factory Fiberglass WLAN Antennas Lora Wifi Antena GSM 3G 4G Lte 5G Omni Directional 3dbi 5dbi 8dbi 12dbi

Share Post

OEM factory Fiberglass WLAN Antennas Lora Wifi Antena GSM 3G 4G Lte 5G Omni Directional 3dbi 5dbi 8dbi 12dbi

Technical Details

Product Name: OEM factory Fiberglass WLAN Antennas Lora Wifi Antena GSM 3G 4G Lte 5G Omni Directional 3dbi 5dbi 8dbi 12dbi


Characteristic:

Frequency:  433Mhz / 868~915Mhz / 868Mhz / 915Mhz                  

Connector:  N connector (Support OEM)

Gain:  2dBi, 3dBi, 5dBi, 6dBi, 8dBi, 12dBi, optional

VSWR:  1 : 1.15 or 1:2.0  or 1:2.5 (according to Gain)

Impendance:  50 ohm

Mounting type: Screw with pad

Tube Length: 360mm, 610mm. 800mm, 900mm, 1300mm (According to Gain);

Fiber Tube color: White, grey, support OEM.

Label: Support OEM

Rated TEMP :  -30 to + 75 Degree



Why to use Fiber Glass antanna? :

Compatible with all Helium Device, including Helium, Nebra, Bobcat, Clodpi, Syncrobit, Cal-Chip, Heltec, Kerlink, Linxdot, LongAP, ParleyLabs, SenseCap, Controllino, RAK/MNTD, Dragion. With stronger signal, logner reach and support outdoor waterproof IP68. FiberGlass body can prevent damage from outside enviroment.


Application:

The antenna can be used in any environment where long-range LoRa connections are required.

  • Agriculture
  • Environmental Monitoring
  • Urban Monitoring
  • Individual Household

For some applications like in an urban environment or where large stretches of land have to be monitored the normal range of LoRa might not be enough. So If you need to increase the range for your LoRa devices, then this outdoor LoRa Fiberglass antenna will be the ideal addition to your LoRa system.  It’s a robust solution to provide extra power and range for outdoor LoRa Base stations. The antenna has an average gain of 8 dBi, a length of 130cm, and a frequency range from 863-870MHz, and it comes with hardware for pole and wall mounting.

The Antenna has an N-J Double tooth connector, and it comes with an N-Female to RP-SMA plug cable so it can be easily connected to the SenseCAP Gateways.


RoHS:

All material comply with RoHS;


Factory’s Advantage:

Sinrui’s factory got ISO9001:2015 Quality Management System and has over 18 years’ experience and technique in antennas fields.

We design and produce all components and assembly by ourselves in factory and production is mainly by automatic machines.

For every customer, we have project managers to resolve and support immediately;

 


Custom OEM Service:

Sinrui Tech can provide OEM service for Customers deamand. Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.

 
We set up our a over 20 members of Engineering team for Customer OEM Service.

 

 

 

 

With Dark Room for designing testing.

 

 

 

Built up testing Room and equipped with complete testers, including Network analizer, drop tester,
resistance tester, High & Low TEMP Impact tester, 2.5D Projector tester,etc.

 


Minumum Order Quantity:

We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.

for high volumn order, our facilities can afford montly 1000K products.


Quality Assurance:
1. most of key parts are machined by automatic machinie, its production is standard with high consistency.

2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.

3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;

4. All goods will be 100% tested by electronics test and visual test before out-going shipment.

With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.


Samples Request:
Welcome to order 1 sample by paying samples fee.

We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).


Leadtime:

Our leadtime is normally 3~4 weeks.
If OEM product, it will be 4~5 weeks for 1st order, fucture will be normal as 3~4 weeks.

For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be 2~3 weeks.


Shipping Way:

We accept that you have your carrier to ship cargos, and we have

experienced oversea opporator to handle carrier detailed work.

And also, we can also include the international transportation for customers, as we have long term relationship with interational logistics partner for air, ocean shipment.


How to Pay:

We accept Paypal, Bank transfer and Pingpong, etc.


Click here to contact us now for more!

 

Additional Informations

Gallery

Technical Details

Product Name: OEM factory Fiberglass WLAN Antennas Lora Wifi Antena GSM 3G 4G Lte 5G Omni Directional 3dbi 5dbi 8dbi 12dbi


Characteristic:

Frequency:  433Mhz / 868~915Mhz / 868Mhz / 915Mhz                  

Connector:  N connector (Support OEM)

Gain:  2dBi, 3dBi, 5dBi, 6dBi, 8dBi, 12dBi, optional

VSWR:  1 : 1.15 or 1:2.0  or 1:2.5 (according to Gain)

Impendance:  50 ohm

Mounting type: Screw with pad

Tube Length: 360mm, 610mm. 800mm, 900mm, 1300mm (According to Gain);

Fiber Tube color: White, grey, support OEM.

Label: Support OEM

Rated TEMP :  -30 to + 75 Degree



Why to use Fiber Glass antanna? :

Compatible with all Helium Device, including Helium, Nebra, Bobcat, Clodpi, Syncrobit, Cal-Chip, Heltec, Kerlink, Linxdot, LongAP, ParleyLabs, SenseCap, Controllino, RAK/MNTD, Dragion. With stronger signal, logner reach and support outdoor waterproof IP68. FiberGlass body can prevent damage from outside enviroment.


Application:

The antenna can be used in any environment where long-range LoRa connections are required.

  • Agriculture
  • Environmental Monitoring
  • Urban Monitoring
  • Individual Household

For some applications like in an urban environment or where large stretches of land have to be monitored the normal range of LoRa might not be enough. So If you need to increase the range for your LoRa devices, then this outdoor LoRa Fiberglass antenna will be the ideal addition to your LoRa system.  It’s a robust solution to provide extra power and range for outdoor LoRa Base stations. The antenna has an average gain of 8 dBi, a length of 130cm, and a frequency range from 863-870MHz, and it comes with hardware for pole and wall mounting.

The Antenna has an N-J Double tooth connector, and it comes with an N-Female to RP-SMA plug cable so it can be easily connected to the SenseCAP Gateways.


RoHS:

All material comply with RoHS;


Factory’s Advantage:

Sinrui’s factory got ISO9001:2015 Quality Management System and has over 18 years’ experience and technique in antennas fields.

We design and produce all components and assembly by ourselves in factory and production is mainly by automatic machines.

For every customer, we have project managers to resolve and support immediately;

 


Custom OEM Service:

Sinrui Tech can provide OEM service for Customers deamand. Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.

 
We set up our a over 20 members of Engineering team for Customer OEM Service.

 

 

 

 

With Dark Room for designing testing.

 

 

 

Built up testing Room and equipped with complete testers, including Network analizer, drop tester,
resistance tester, High & Low TEMP Impact tester, 2.5D Projector tester,etc.

 


Minumum Order Quantity:

We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.

for high volumn order, our facilities can afford montly 1000K products.


Quality Assurance:
1. most of key parts are machined by automatic machinie, its production is standard with high consistency.

2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.

3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;

4. All goods will be 100% tested by electronics test and visual test before out-going shipment.

With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.


Samples Request:
Welcome to order 1 sample by paying samples fee.

We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).


Leadtime:

Our leadtime is normally 3~4 weeks.
If OEM product, it will be 4~5 weeks for 1st order, fucture will be normal as 3~4 weeks.

For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be 2~3 weeks.


Shipping Way:

We accept that you have your carrier to ship cargos, and we have

experienced oversea opporator to handle carrier detailed work.

And also, we can also include the international transportation for customers, as we have long term relationship with interational logistics partner for air, ocean shipment.


How to Pay:

We accept Paypal, Bank transfer and Pingpong, etc.


Click here to contact us now for more!

 

Additional Informations

Gallery