Sinrui Technology
Sinrui Technology
Home » Products » N-KY-LMR100
N-KY-LMR100

Please do contact us if you need a custom design

Send Enquiry
Home » Products » N-KY-LMR100
N-KY-LMR100

Please do contact us if you need a custom design

Send Enquiry

Description

The N-type connector has been in use for many years. It was originally designed by Paul Neill of Bell Laboratories, and it is said to have gained its name from the first letter of his surname, although some references state that the N stands for Navy where the connector was initially used.

The development of the N-type connector arose out of the need for a high performance RF connector with a constant impedance, and its initial design aim was to perform up to 1 GHz. Since its first introduction, it has found many applications in areas where good RF performance is needed, along with the ability to carry high levels of power, and to be used with the larger sized coaxial cables. Also its peformance has been shown to extend well beyond the initial 1 GHz design aim.

The N-type connector has been in use for many years. It was originally designed by Paul Neill of Bell Laboratories, and it is said to have gained its name from the first letter of his surname, although some references state that the N stands for Navy where the connector was initially used.

The development of the N-type connector arose out of the need for a high performance RF connector with a constant impedance, and its initial design aim was to perform up to 1 GHz. Since its first introduction, it has found many applications in areas where good RF performance is needed, along with the ability to carry high levels of power, and to be used with the larger sized coaxial cables. Also its peformance has been shown to extend well beyond the initial 1 GHz design aim.

What advantages do Waterproof circular connectors bring?2022-09-18T23:54:20+08:00

First, Contact resistance.

This is a waterproof round ConnectorFor the performance of common electrical equipment, the contact resistance of high-quality connectors should be relatively stable. Generally speaking, the change of resistance ranges from a few milliohms to tens of milliohms.

Second, the insulation resistance of waterproof plug.

Waterproof round ConnectorThe insulation resistance is also one of the main indexes of its electrical performance. Insulation resistance can measure the insulation performance between the contact parts of the connector and the shell. In industry regulations, the insulation range ranges from hundreds of megaohms to thousands of megaohms.

In addition, the waterproof circular connector also has reflection coefficient, characteristic impedance, current and other coefficients, characteristic impedance, current and so on.

Is Sinrui’s gold plating always lead-free and RoHS compliant?2022-09-18T23:54:03+08:00

Yes, Sinrui’s gold plating is always lead-free and RoHS compliant (pre-plated or in house plated).

Will Sinrui provide a formal RoHS CoC (Certificate of Compliance) for their products?2022-09-18T23:53:27+08:00

Yes, upon request, Sinrui will provide a formal CoC. Please provide Company name and address as well as Company contact and contact information of the person requesting the CoC along with valid Sinrui part numbers to our General Technical Support Group.

What is the optimal signal-to-ground ratio?2022-09-18T23:53:03+08:00

A signal-to-ground ratio of 1:1 is usually optimal, but for connectors with large pin arrays signal-to-ground rations of less than 1:1 may be required for reliable high speed single-ended operation.

Title

Go to Top