Milimeter wave Connector Stainless Steel 2.92mm Female Flange PCB mount
Technical Details
2.92 mm connectors are to working in a RF range at millimeter wave of RF connectors, its working frequency is normally over 40GHz. It has characteristic of high working frequency, but small size and high precision. 2.92mm connector uses air as its dielectricity, and the connector has a small size, lightweight and high reliability of character; As its structure size is similar size to working wave length, any tiny change will affect its electrical performance. As a result, it requires a high precision of inner structure which also brings a higher requirement in design and manufacturing. Its interface can work with SMA and 3.5mm connectors while keeping a high performance. It can afford a very low VSWR, insertion loss, nad RF leakage thus it is a good choice for the high precision applications like testers, millitary devices, and Telecommunication.
Product Name: Milimeter wave Connector Stainless Steel 2.92mm Female Flange PCB mount
Key Performance
Connector Type: 2.92mm
Material Body: Stainless steel, passivated
Center Contact: Becu, gold plated
Insulator: PEI
Conductor Contact: female
Body Structure: Straight
Mounting Type: Flange mount
Cable Type: none
Electrical Characteristics:
Frequency: DC to 40 GHz
Impedance: 50 Ohm
Temperature: -65℃ to + 165℃
Insulation resistance: Min 3000MΩ
Dielectric withstanding voltage: 7500 V
VSWR: ≤1.15
Contact resistance: Inner 3.0MΩ ,Outer 2.0MΩ
Lifecycle: 500 Cycles
Custom OEM Service:
We have standard products, but also provide OEM service for size, shape, structure, material type, electronic parameter request, etc.
Factory was equipped with a complete set of necessary testers, including but not limited: network analizer, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.
Let us know your OEM requirement, and we will provide you solution and offer within 48 Hours.
Minumum Order Quantity:
We did not have any MOQ request, even if you only order 1pcs sample for test or evaluation, we can also provide the products.
For high volumn order, our facilities can afford monthly 1000K products.
Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.
2. All assemblies are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.
3. We are a direct factory with ISO9001:2015 Quality Management Standard Certificate, and we implement the standard;
4. All goods will be 100% tested by electronics test and visual test before out-going shipment.
With the above operation, we will try our best to make sure the goods delivered to customer are qualified and per Data sheet.
Samples Request:
We normally provide 2~5 pcs free samples of standard products in stock, and the Buyer will only need to cover the international freight.
For OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.
We normally use DHL, FeDEx, and UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).
Leadtime:
Our leadtime is normally 3 weeks.
If OEM product, it will be 4 weeks.
For high volume order, if there is forecast communication and agreement, we will prepare material so that leadtime can be 1 week.
How to Pay:
We accept Paypal, Bank transfer and Pingpong, etc.
Additional Informations
Gallery
Technical Details
2.92 mm connectors are to working in a RF range at millimeter wave of RF connectors, its working frequency is normally over 40GHz. It has characteristic of high working frequency, but small size and high precision. 2.92mm connector uses air as its dielectricity, and the connector has a small size, lightweight and high reliability of character; As its structure size is similar size to working wave length, any tiny change will affect its electrical performance. As a result, it requires a high precision of inner structure which also brings a higher requirement in design and manufacturing. Its interface can work with SMA and 3.5mm connectors while keeping a high performance. It can afford a very low VSWR, insertion loss, nad RF leakage thus it is a good choice for the high precision applications like testers, millitary devices, and Telecommunication.
Product Name: Milimeter wave Connector Stainless Steel 2.92mm Female Flange PCB mount
Key Performance
Connector Type: 2.92mm
Material Body: Stainless steel, passivated
Center Contact: Becu, gold plated
Insulator: PEI
Conductor Contact: female
Body Structure: Straight
Mounting Type: Flange mount
Cable Type: none
Electrical Characteristics:
Frequency: DC to 40 GHz
Impedance: 50 Ohm
Temperature: -65℃ to + 165℃
Insulation resistance: Min 3000MΩ
Dielectric withstanding voltage: 7500 V
VSWR: ≤1.15
Contact resistance: Inner 3.0MΩ ,Outer 2.0MΩ
Lifecycle: 500 Cycles
Custom OEM Service:
We have standard products, but also provide OEM service for size, shape, structure, material type, electronic parameter request, etc.
Factory was equipped with a complete set of necessary testers, including but not limited: network analizer, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.
Let us know your OEM requirement, and we will provide you solution and offer within 48 Hours.
Minumum Order Quantity:
We did not have any MOQ request, even if you only order 1pcs sample for test or evaluation, we can also provide the products.
For high volumn order, our facilities can afford monthly 1000K products.
Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.
2. All assemblies are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.
3. We are a direct factory with ISO9001:2015 Quality Management Standard Certificate, and we implement the standard;
4. All goods will be 100% tested by electronics test and visual test before out-going shipment.
With the above operation, we will try our best to make sure the goods delivered to customer are qualified and per Data sheet.
Samples Request:
We normally provide 2~5 pcs free samples of standard products in stock, and the Buyer will only need to cover the international freight.
For OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.
We normally use DHL, FeDEx, and UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).
Leadtime:
Our leadtime is normally 3 weeks.
If OEM product, it will be 4 weeks.
For high volume order, if there is forecast communication and agreement, we will prepare material so that leadtime can be 1 week.
How to Pay:
We accept Paypal, Bank transfer and Pingpong, etc.