L1 L5 DBS B1 B2 GLONASS L1 with 3M glue base Duan Band Car GNSS Antennas for different vehicles
L1 L5 DBS B1 B2 GLONASS L1 with 3M glue base Duan Band Car GNSS Antennas for different vehicles
Technical Details
Product Name: L1 L5 DBS B1 B2 GLONASS L1 with 3M glue base Duan Band Car GNSS Antennas for different vehicles
Characteristic:
Frequency: GPS L1/L5、BDS B1/ B2、GLONASS L1;
GNSS： L1 = 1559~1610Mhz,
L2=1227~1246Mhz,
L5= 1164~1214Mhz;
VSWR <3.0
Connector: SMA male, Support OEM;
Gain: 28dBi
Impendance: 50 ohm
Mounting : Glue
Label: Support OEM
Rated TEMP : -30 to + 85 Degree
DC voltage: 3.0~5.0V
Current (mA): 40mA Min.
Size: Contact us for more standard size or OEM size;
Why to choose SINRUI Car antanna? :
Car Actenna adopted multi-feed point and completely symmetrical structure, which lower the influence of antenna to measurement error while surveying.
Antenna has high Gain, with pattern wide beam, with good reception with low elevation signal, insure the normal satellite signal reception even in serious occlusion environment.
The Low noise amplifier section adopted pre-filtering scheme to effectively suppress out-of-band interference and improve the
reliability of the system.
Application:
This is a high precision car antenna covered GPS L1/L5, BDS 2nd generation B1/ B2, GLONASS L1, it can meet the request of
multi-system compatible and high precision measuring from GNSS surveying equipment. It is widely be used in Geodesy and
mapping, Marine survey, Geological deformation monitoring and other filed.
RoHS:
All material comply with RoHS;
Factory’s Advantage:
Sinrui’s factory got ISO9001:2015 Quality Management System and has over 18 years’ experience and technique in antennas fields.
We design and produce all components and assembly by ourselves in factory and production is mainly by automatic machines.
For every customer, we have project managers to resolve and support immediately;
Custom OEM Service:
Sinrui Tech can provide OEM service for Customers deamand. Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.
We set up our a over 20 members of Engineering team for Customer OEM Service.
With Dark Room for designing testing.
Built up testing Room and equipped with complete testers, including Network analizer, drop tester,
resistance tester, High & Low TEMP Impact tester, 2.5D Projector tester,etc.
Minumum Order Quantity:
We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.
for high volumn order, our facilities can afford montly 1000K products.
Quality Assurance:
1. most of key parts are machined by automatic machinie, its production is standard with high consistency.
2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.
3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;
4. All goods will be 100% tested by electronics test and visual test before out-going shipment.
With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.
Samples Request:
Welcome to order 1 sample by paying samples fee.
We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).
Leadtime:
Our leadtime is normally 2~3 weeks.
If OEM product, it will be 3~4 weeks for 1st order, fucture will be normal as 2~3 weeks.
For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be within 2 weeks.
Shipping Way:
We accept that you have your carrier to ship cargos, and we have
experienced oversea opporator to handle carrier detailed work.
And also, we can also include the international transportation for customers, as we have long term relationship with interational logistics partner for air, ocean shipment.
How to Pay:
We accept Paypal, Bank transfer and Pingpong, etc.
Click here to contact us now for more!
Additional Informations
Gallery
Technical Details
Product Name: L1 L5 DBS B1 B2 GLONASS L1 with 3M glue base Duan Band Car GNSS Antennas for different vehicles
Characteristic:
Frequency: GPS L1/L5、BDS B1/ B2、GLONASS L1;
GNSS： L1 = 1559~1610Mhz,
L2=1227~1246Mhz,
L5= 1164~1214Mhz;
VSWR <3.0
Connector: SMA male, Support OEM;
Gain: 28dBi
Impendance: 50 ohm
Mounting : Glue
Label: Support OEM
Rated TEMP : -30 to + 85 Degree
DC voltage: 3.0~5.0V
Current (mA): 40mA Min.
Size: Contact us for more standard size or OEM size;
Why to choose SINRUI Car antanna? :
Car Actenna adopted multi-feed point and completely symmetrical structure, which lower the influence of antenna to measurement error while surveying.
Antenna has high Gain, with pattern wide beam, with good reception with low elevation signal, insure the normal satellite signal reception even in serious occlusion environment.
The Low noise amplifier section adopted pre-filtering scheme to effectively suppress out-of-band interference and improve the
reliability of the system.
Application:
This is a high precision car antenna covered GPS L1/L5, BDS 2nd generation B1/ B2, GLONASS L1, it can meet the request of
multi-system compatible and high precision measuring from GNSS surveying equipment. It is widely be used in Geodesy and
mapping, Marine survey, Geological deformation monitoring and other filed.
RoHS:
All material comply with RoHS;
Factory’s Advantage:
Sinrui’s factory got ISO9001:2015 Quality Management System and has over 18 years’ experience and technique in antennas fields.
We design and produce all components and assembly by ourselves in factory and production is mainly by automatic machines.
For every customer, we have project managers to resolve and support immediately;
Custom OEM Service:
Sinrui Tech can provide OEM service for Customers deamand. Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.
We set up our a over 20 members of Engineering team for Customer OEM Service.
With Dark Room for designing testing.
Built up testing Room and equipped with complete testers, including Network analizer, drop tester,
resistance tester, High & Low TEMP Impact tester, 2.5D Projector tester,etc.
Minumum Order Quantity:
We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.
for high volumn order, our facilities can afford montly 1000K products.
Quality Assurance:
1. most of key parts are machined by automatic machinie, its production is standard with high consistency.
2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.
3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;
4. All goods will be 100% tested by electronics test and visual test before out-going shipment.
With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.
Samples Request:
Welcome to order 1 sample by paying samples fee.
We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).
Leadtime:
Our leadtime is normally 2~3 weeks.
If OEM product, it will be 3~4 weeks for 1st order, fucture will be normal as 2~3 weeks.
For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be within 2 weeks.
Shipping Way:
We accept that you have your carrier to ship cargos, and we have
experienced oversea opporator to handle carrier detailed work.
And also, we can also include the international transportation for customers, as we have long term relationship with interational logistics partner for air, ocean shipment.
How to Pay:
We accept Paypal, Bank transfer and Pingpong, etc.
Click here to contact us now for more!
