Description
The BNC connector was originally designed for military applications but is mostly used in the broadcast market today. This connector has evolved to keep up with the changing landscape of the industry and now provides 12G SDI performance that is required in 4K and Ultra-HD applications. BNC connector types designed for coaxial cable have been widely adopted and continue to be a popular choice for existing and next-generation video technology.BNC connectors are miniature, lightweight and reliable. 50 ohm BNC and 75 ohm BNC connectors are available in configurations ideal for commercial and military-grade applications. A full line of printed circuit board (PBC) receptacles, bulkhead receptacles, reverse-polarity connectors, resistor terminations, and other accessories complement the product offering.
Related products
First, Contact resistance.
This is a waterproof round ConnectorFor the performance of common electrical equipment, the contact resistance of high-quality connectors should be relatively stable. Generally speaking, the change of resistance ranges from a few milliohms to tens of milliohms.
Second, the insulation resistance of waterproof plug.
Waterproof round ConnectorThe insulation resistance is also one of the main indexes of its electrical performance. Insulation resistance can measure the insulation performance between the contact parts of the connector and the shell. In industry regulations, the insulation range ranges from hundreds of megaohms to thousands of megaohms.
In addition, the waterproof circular connector also has reflection coefficient, characteristic impedance, current and other coefficients, characteristic impedance, current and so on.
Yes, Sinrui’s gold plating is always lead-free and RoHS compliant (pre-plated or in house plated).
Yes, upon request, Sinrui will provide a formal CoC. Please provide Company name and address as well as Company contact and contact information of the person requesting the CoC along with valid Sinrui part numbers to our General Technical Support Group.
A signal-to-ground ratio of 1:1 is usually optimal, but for connectors with large pin arrays signal-to-ground rations of less than 1:1 may be required for reliable high speed single-ended operation.
