Board to Board Connector 2.00mm Pin Header Single Row 2 to 40 Pins Straight DIP Mount
Board to Board Connector 2.00mm Pin Header Single Row 2 to 40 Pins Straight DIP Mount
Technical Details
Product Name: Board to Board Connector 2.00mm Pin Header Single Row 2 to 40 Pins Straight DIP Mount
Characteristic:
Pitch: 2.00 mm (optional)
Row: dual row (optional)
Positions: 2 to 40 pins (optional)
Pin length range: 5 to 40 mm (To be specified)
Pin Post Height: 5.0mm (or to be specified)
Body Structure: 90 degree, right angle
Mount type: through PCB hole
Plastics height: 1.5,2.0 mm (optional)
Material:
Pin: Brass, Plated gold.
Plastics: PA6T, UL94V-0
Max soldering TEMP: 230 °C for 30~60 seconds.
260°C for 10 seconds
Electronics Parameters:
Rated Current: 1.5 Amps
Withstanding Voltage: 500 V DC/AC
Contact resistance: 20M Ohm Max.
Insulation resistance: 1000M Ohm Min.
Temperature range from/to -40 °C / 105 °C
Package:
Standard package is loose in PE bag,
Optional plastics tube or tape & reel with Picking Cap if users need.
Factory’s Advantage:
We offer high quality connectors while in a good price and a short Lead-Time which is based on that Our production is by automatic machines and we produce all parts by ourselves, then we assemble them as finished connectors by multiple automatic assembly machines.
And our assembly machines are equipped with ultrared ray and CCD tester so as to do inspection while in production.
We have over 50 units of production machines in over 5000 square meters of factory;
Factory got ISO9001:2015 Quality management System.
Below are parts of our production facilities:
Custom OEM Service:
- Sinrui Tech can produce and OEM the connecotrs by ourseleves, so that we can support an OEM connectors for your application.
- Factory is equipped with complete set of neccessory testers, including not limited: Current tester, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.
- We have long term relationship with our factory local city of
connectors raw material & parts, that we can provide the fast-response and sampling of your inquiry.
Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.
Minumum Order Quantity:
We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.
for high volumn order, our facilities can afford montly 1000K products.
Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.
2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.
3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;
4. All goods will be 100% tested by electronics test and visual test before out-going shipment.
With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.
Samples Request:
We normally provide free samples 2~5 pcs of standard products in stock, and the Buyer will only need to cover the international freight.
for OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.
We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).
Leadtime:
Our leadtime is normally 3~4 weeks.
If OEM product, it will be 4~5 weeks for 1st order, fucture will be normal as 3~4 weeks.
For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be 1~2 weeks.
Shipping Way:
We accept that you have your carrier to ship cargos, and we have
experienced oversea opporator to handle carrier detailed work.
And also, we can also include the international transportation for customers, as we have long term relationship with interational logistics partner for air, ocean shipment.
How to Pay:
We accept Paypal, Bank transfer and Pingpong, etc.
Click here to contact us now for more!
Additional Informations
Gallery
Technical Details
Product Name: Board to Board Connector 2.00mm Pin Header Single Row 2 to 40 Pins Straight DIP Mount
Characteristic:
Pitch: 2.00 mm (optional)
Row: dual row (optional)
Positions: 2 to 40 pins (optional)
Pin length range: 5 to 40 mm (To be specified)
Pin Post Height: 5.0mm (or to be specified)
Body Structure: 90 degree, right angle
Mount type: through PCB hole
Plastics height: 1.5,2.0 mm (optional)
Material:
Pin: Brass, Plated gold.
Plastics: PA6T, UL94V-0
Max soldering TEMP: 230 °C for 30~60 seconds.
260°C for 10 seconds
Electronics Parameters:
Rated Current: 1.5 Amps
Withstanding Voltage: 500 V DC/AC
Contact resistance: 20M Ohm Max.
Insulation resistance: 1000M Ohm Min.
Temperature range from/to -40 °C / 105 °C
Package:
Standard package is loose in PE bag,
Optional plastics tube or tape & reel with Picking Cap if users need.
Factory’s Advantage:
We offer high quality connectors while in a good price and a short Lead-Time which is based on that Our production is by automatic machines and we produce all parts by ourselves, then we assemble them as finished connectors by multiple automatic assembly machines.
And our assembly machines are equipped with ultrared ray and CCD tester so as to do inspection while in production.
We have over 50 units of production machines in over 5000 square meters of factory;
Factory got ISO9001:2015 Quality management System.
Below are parts of our production facilities:
Custom OEM Service:
- Sinrui Tech can produce and OEM the connecotrs by ourseleves, so that we can support an OEM connectors for your application.
- Factory is equipped with complete set of neccessory testers, including not limited: Current tester, contact resistance tester, high voltage withstanding tester, insulation resistance tester, etc.
- We have long term relationship with our factory local city of
connectors raw material & parts, that we can provide the fast-response and sampling of your inquiry.
Write us know your OEM requirement, and we will providue you solution and offer within 48 Hours.
Minumum Order Quantity:
We didnot have any MOQ request, even you only 1pcs samples for test or evaluation, we can also provide the products.
for high volumn order, our facilities can afford montly 1000K products.
Quality Assurance:
1. All parts are machined by automatic lathes machining, its production is standard with high consistency.
2. All assembly are with <Procedure Follow Chart>, and every work station will have IPQC. Finally tested by FQC.
3. We are direct factory with ISO9001:2015 Quality Managment Standard Certificate, and we implement the standard;
4. All goods will be 100% tested by electronics test and visual test before out-going shipment.
With above operation, we will try best to make sure goods delivered to customer are qualified and per Data sheet.
Samples Request:
We normally provide free samples 2~5 pcs of standard products in stock, and the Buyer will only need to cover the international freight.
for OEM products we also provide the sampling service while the Buyer pay for necessary & reasonable sampling cost.
We normally use DHL, Fedex, UPS to ship samples which will take within 3~7 days(detailed per Buyer location address).
Leadtime:
Our leadtime is normally 3~4 weeks.
If OEM product, it will be 4~5 weeks for 1st order, fucture will be normal as 3~4 weeks.
For high volume order, if there is forecast communication and aggrement, we will prepare material so that leadtime can be 1~2 weeks.
Shipping Way:
We accept that you have your carrier to ship cargos, and we have
experienced oversea opporator to handle carrier detailed work.
And also, we can also include the international transportation for customers, as we have long term relationship with interational logistics partner for air, ocean shipment.
How to Pay:
We accept Paypal, Bank transfer and Pingpong, etc.
Click here to contact us now for more!
