The following information about your application will help determine if a connector system can meet the signal integrity requirements: – System Topology: point-to-point, multi-drop, point-to-many-point, Star, etc – Termination Type: Parallel (one/both ends), Products, Active, RC, none – Clocking/Data Recovery: synchronous, asynchronous, source synchronous, CDR – Signaling Type: Single-Ended or Differential – Data Encoding: Binary, PAM-2, PAM-4, etc – Signal Technology: examples include LVTTL, SSTL-2, Rambus, LVDS, PECL, CMOS, GTL+ – Signal Data Rate: specified in Mbps or Gbps – Signal Edge Rate: specify 10/90 or 20/80 – System Impedance – specified in ohms along with tolerance (e.g., +/- 10%) – Crosstalk Requirements: specified at receiver (in % of voltage swing or dB) – Skew to make educated recommendations.
Does the stack height of the connector make a difference in its speed?wyb123ol2022-11-16T09:05:30+00:00
Yes, upon request, Sinrui will provide a formal CoC. Please provide Company name and address as well as Company contact and contact information of the person requesting the CoC along with valid Sinrui part numbers to our General Technical Support Group.
Is Sinrui’s gold plating always lead-free and RoHS compliant?wyb123ol2022-11-16T09:03:43+00:00
This is a waterproof round ConnectorFor the performance of common electrical equipment, the contact resistance of high-quality connectors should be relatively stable. Generally speaking, the change of resistance ranges from a few milliohms to tens of milliohms.
Second, the insulation resistance of waterproof plug.
Waterproof round ConnectorThe insulation resistance is also one of the main indexes of its electrical performance. Insulation resistance can measure the insulation performance between the contact parts of the connector and the shell. In industry regulations, the insulation range ranges from hundreds of megaohms to thousands of megaohms.
In addition, the waterproof circular connector also has reflection coefficient, characteristic impedance, current and other coefficients, characteristic impedance, current and so on.